From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Jul 07 2006 - 15:17:27 ART
Look at the "show frame-relay map" output. You need to make sure that
layer 3 to layer 2 resolution is being performed properly via Frame
Relay Inverse-ARP. As an alternative you can use the static
"frame-relay map" statement or use a point-to-point subinterface.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> chris
> Sent: Friday, July 07, 2006 1:10 PM
> To: ccielab@groupstudy.com
> Subject: help
>
> i am trying a point-to-point fr like between two routers
>
<http://pastebin.ca/81619>http<http://pastebin.ca/81619>://pastebin.ca/8
16
> 19
> what am i dont wrong - is this a hardware issue
>
>
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART