From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Jun 25 2006 - 17:02:03 ART
Hi Leon,
Thanks, but the neighbors had the ip ospf priority 0 in the interface
I think this has nothing to do, but It could be
I must lab it again...
Saludos,
Victor.
-----Mensaje original-----
De: Leon van Dongen [mailto:l.dongen1@chello.nl]
Enviado el: Domingo, 25 de Junio de 2006 08:12 a.m.
Para: Victor Cappuccio
CC: ccielab@groupstudy.com
Asunto: Re: OSPF: Neighbor command is allowed only on NBMA and
point-to-multipoint networks
Victor,
In case of the spoke routers with interface configuration command "ip
ospf priority 0", the neighbor command dissapears from the
running-configuration. The neighbor command on the hub in sufficient to
succcessfully discover its neighbors.
--Leon
Victor Cappuccio schreef:
> Hi Guys.
>
>
>
> Playing around with the different OSPF network types, I had configured on
> one Hub Frame-relay Router the neighbor command and in the interface that
> connects to the 2 Spokes is configured the default network type from NBMA
>
>
>
> Rack1R4#show ip ospf inter s0/0.255 | in Net
>
> Process ID 1, Router ID 150.1.4.4, Network Type NON_BROADCAST, Cost: 64
>
>
>
> Rack1R4#show run | in neigh
>
> neighbor 150.1.245.1
>
> neighbor 150.1.245.3
>
>
>
> But when I reload the router, it shows me this
>
>
>
> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> networks
>
> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> networks
>
>
>
> And the neighbor command disappears ?
>
>
>
> Rack1R4#show ver | in IOS|Compiled
>
>
> IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(18), RELEASE SOFTWARE
> (fc3)
>
> Compiled Wed 15-Mar-06 14:15 by dchih
>
>
>
>
> Any thought
>
> Thanks
>
> Victor.-
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART