OSPF: Neighbor command is allowed only on NBMA and

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sat Jun 24 2006 - 13:47:48 ART

Hi Guys.

 

Playing around with the different OSPF network types, I had configured on
one Hub Frame-relay Router the neighbor command and in the interface that
connects to the 2 Spokes is configured the default network type from NBMA

 

Rack1R4#show ip ospf inter s0/0.255 | in Net

  Process ID 1, Router ID 150.1.4.4, Network Type NON_BROADCAST, Cost: 64

 

Rack1R4#show run | in neigh

 neighbor 150.1.245.1

 neighbor 150.1.245.3

 

But when I reload the router, it shows me this

 

OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks

OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks

 

And the neighbor command disappears ?

 

Rack1R4#show ver | in IOS|Compiled

IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(18), RELEASE SOFTWARE
(fc3)

Compiled Wed 15-Mar-06 14:15 by dchih

 

Any thought

Thanks

Victor.-

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART