From: Sami (sy1977@gmail.com)
Date: Thu Jun 22 2006 - 13:33:41 ART
Group,
What is default Tc for a ethenet interface ? I configured a policy and used
50% bandwidth , by caluclation it looks like default tc is 200 ms ? Is that
correct ?
R4#show policy-map interface fastEthernet 0/0
FastEthernet0/0
Service-policy output: Pri
Class-map: IT (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 81
Queueing
Strict Priority
Output Queue: Conversation 264
Bandwidth 50 (%)
* Bandwidth 50000 (kbps) Burst 1250000 (Bytes)
* (pkts matched/bytes matched) 0/0
(total drops/bytes drops) 0/0
Class-map: class-default (match-any)
15 packets, 1849 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Thanks
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART