From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Thu Jun 22 2006 - 15:54:35 ART
Sami,
Could you explain what you mean by Tc in relation to applying the bandwidth
command and how you arrive at the 200ms figure?
Chris
On 6/22/06, Sami <sy1977@gmail.com> wrote:
>
> Group,
>
> What is default Tc for a ethenet interface ? I configured a policy and
> used
> 50% bandwidth , by caluclation it looks like default tc is 200 ms ? Is
> that
> correct ?
>
> R4#show policy-map interface fastEthernet 0/0
> FastEthernet0/0
>
> Service-policy output: Pri
>
> Class-map: IT (match-all)
> 0 packets, 0 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: access-group 81
> Queueing
> Strict Priority
> Output Queue: Conversation 264
> Bandwidth 50 (%)
> * Bandwidth 50000 (kbps) Burst 1250000 (Bytes)
> * (pkts matched/bytes matched) 0/0
> (total drops/bytes drops) 0/0
>
> Class-map: class-default (match-any)
> 15 packets, 1849 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: any
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART