From: Elias Chari (elias.chari@gmail.com)
Date: Sun Jun 11 2006 - 10:53:47 ART
use the subnets keyword in your redistribution statement
Rgds
Elias
On 6/11/06, Daniel Fredrick <dfredrick@gmail.com> wrote:
>
> I think they want you to use the "ip ospf 1 area 46" command on the vlan
> 46
> interface on R6.
>
> On 6/11/06, Aamir Aziz <aamiraz77@gmail.com> wrote:
> >
> > Hi there
> >
> > I was doing IEX vol 1 lab 1 task 3.3, it tells me to redistribute VLan
> 46
> > into OSPF on R6 and not to use the network statement so i did this
> > according
> > to the solution:
> >
> > R6:
> > router ospf 1
> > router-id 150.1.6.6
> > log-adjacency-changes
> > redistribute connected route-map CONNECTED2OSPF
> > network 150.1.6.6 0.0.0.0 area 46
> > network 183.1.46.6 0.0.0.0 area 46
> >
> > ip prefix-list VLAN_6 seq 5 permit 183.1.6.0/24
> > route-map CONNECTED2OSPF permit 10
> > match ip address prefix-list VLAN_6
> >
> > pretty simple right? but no routes, i dont see this network anywhere in
> > the
> > OSPF domain or on any router but when i use the network command it comes
> > ok
> > no problem..so what am i missing here? or its just a typo error i made
> on
> > the router.
> >
> > Thanks in advance
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART