From: Godswill Oletu (oletu@inbox.lv)
Date: Sun Jun 11 2006 - 10:52:13 ART
Aamir,
Check your 'prefix-list'.
Though, not a very good thing but I am getting used to IEX workbook and
their IP addressing scheme to the extend that, if they say VLAN46; 9 (if not
10) out of 10 times, the 3rd octet of the IPv4 address of that interface
will be the number 46.
And if the theory above is correct, your prefix-list is matching VLAN6 and
not VLAN46. So do not expect to see VLAN46 get redistributed into OSPF with
that prefix-list.
HTH
Godswill Oletu
----- Original Message -----
From: "Aamir Aziz" <aamiraz77@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, June 11, 2006 9:02 AM
Subject: IEX vol 1 lab 1 task 3.3
> Hi there
>
> I was doing IEX vol 1 lab 1 task 3.3, it tells me to redistribute VLan 46
> into OSPF on R6 and not to use the network statement so i did this
according
> to the solution:
>
> R6:
> router ospf 1
> router-id 150.1.6.6
> log-adjacency-changes
> redistribute connected route-map CONNECTED2OSPF
> network 150.1.6.6 0.0.0.0 area 46
> network 183.1.46.6 0.0.0.0 area 46
>
> ip prefix-list VLAN_6 seq 5 permit 183.1.6.0/24
> route-map CONNECTED2OSPF permit 10
> match ip address prefix-list VLAN_6
>
> pretty simple right? but no routes, i dont see this network anywhere in
the
> OSPF domain or on any router but when i use the network command it comes
ok
> no problem..so what am i missing here? or its just a typo error i made on
> the router.
>
> Thanks in advance
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART