From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Mon Jun 05 2006 - 12:54:22 ART
Strange...config looks okay.
Do both routers have the same IOS version?
Can you do extended ping between them and paste output. Also can you paste
output of show frame relay map?
On 6/5/06, Sami <sy1977@gmail.com> wrote:
>
> configs..
>
> R1
>
> interface Serial0/0/0
> ip address 183.1.123.1 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 183.1.123.1 102
> frame-relay map ip 183.1.123.2 102 broadcast
> frame-relay map ip 183.1.123.3 102 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial0/1/0
> no ip address
> shutdown
> clock rate 2000000
> !
> router eigrp 100
> network 150.1.1.1 0.0.0.0
> network 183.1.17.1 0.0.0.0
> network 183.1.123.1 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.1.1
> !
> !
>
>
> R2
>
> interface Loopback0
> ip address 150.1.2.2 255.255.255.0
> !
> interface FastEthernet0/0
> ip address 183.1.2.2 255.255.255.0
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial0/0/0
> ip address 183.1.123.2 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 183.1.123.1 201 broadcast
> frame-relay map ip 183.1.123.2 201
> frame-relay map ip 183.1.123.3 203 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial0/1/0
> no ip address
> shutdown
> !
> router eigrp 100
> network 150.1.2.2 0.0.0.0
> network 183.1.2.2 0.0.0.0
> network 183.1.123.2 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.2.2
> !
>
>
>
> On 6/5/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
> >
> > Hello Sami,
> >
> > Can you do a show frame-relay map on both ends.
> >
> > Is the broadcast keyword enabled on both ends?
> >
> >
> > On 6/5/06, Sami < sy1977@gmail.com> wrote:
> >
> > > Group,
> >
> > I have hub and spoke FR setup , I am trying to run EIGRP on that. Hub R2
> > shows adjaceny with both the spokes R1 and R3 but one of the spokes R1
> > giving following error.
> >
> > R1#
> > *Jun 5 14:03:28.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > 183.1.123.2
> > *Jun 5 14:03:28.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > *Jun 5 14:03: 28.263: EIGRP: Neighbor(183.1.123.2) not yet found
> > *Jun 5 14:03:28.807: EIGRP: Sending HELLO on Serial0/0/0
> > *Jun 5 14:03:28.807: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ
> > un/rely
> > 0/0
> > R1#
> > *Jun 5 14:03:33.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > 183.1.123.2
> > *Jun 5 14:03:33.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > *Jun 5 14:03:33.263: EIGRP: Neighbor( 183.1.123.2) not yet found
> > R1#
> > *Jun 5 14:03:38.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > 183.1.123.2
> > *Jun 5 14:03:38.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > *Jun 5 14:03:38.263: EIGRP: Neighbor(183.1.123.2 ) not yet found
> > R1#
> > *Jun 5 14:03:43.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > 183.1.123.2
> > *Jun 5 14:03: 43.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > *Jun 5 14:03:43.263: EIGRP: Neighbor(183.1.123.2) not yet found
> > R1#
> > *Jun 5 14:03:48.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > 183.1.123.2
> > *Jun 5 14:03:48.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > *Jun 5 14:03:48.263: EIGRP: Neighbor(183.1.123.2) not yet found
> > R1#
> >
> > R2#show ip eigrp neighbors
> > IP-EIGRP neighbors for process 100
> > H Address Interface Hold Uptime SRTT
> > RTO Q Seq
> > (sec) (ms) Cnt
> > Num
> > 1 183.1.123.1 Se0/0/0 161
> > 00:01:09 1 5000 1 0
> > 0 183.1.123.3 Se0/0/0 146 00:14:27 27
> > 200 0 3
> > IP-EIGRP neighbors for process 1
> > R2#
> > *Jun 5 14:09:51.940: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> > 183.1.123.1 (Serial0/0/0) is down: retry limit exceeded
> > R2#
> > *Jun 5 14:10: 22.080: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> > 183.1.123.1 (Serial0/0/0) is up: new adjacency
> > R2#
> >
> >
> > what could be the problem ?
> >
> > Thanks,
> >
> > _______________________________________________________________________
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART