From: Larry Chuon (lchuon@gmail.com)
Date: Mon Jun 05 2006 - 13:06:59 ART
Verify that your layer 2 is working properly before you move on. "sh fram
map" and "deb fram pack" to verif your connectivity. BTW, R1 has duplicate
"broadcast" keyword to DLCI 102.
On 6/5/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
>
> Strange...config looks okay.
> Do both routers have the same IOS version?
>
> Can you do extended ping between them and paste output. Also can you paste
> output of show frame relay map?
>
>
> On 6/5/06, Sami <sy1977@gmail.com> wrote:
> >
> > configs..
> >
> > R1
> >
> > interface Serial0/0/0
> > ip address 183.1.123.1 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 183.1.123.1 102
> > frame-relay map ip 183.1.123.2 102 broadcast
> > frame-relay map ip 183.1.123.3 102 broadcast
> > no frame-relay inverse-arp
> > frame-relay lmi-type cisco
> > !
> > interface Serial0/1/0
> > no ip address
> > shutdown
> > clock rate 2000000
> > !
> > router eigrp 100
> > network 150.1.1.1 0.0.0.0
> > network 183.1.17.1 0.0.0.0
> > network 183.1.123.1 0.0.0.0
> > no auto-summary
> > eigrp router-id 150.1.1.1
> > !
> > !
> >
> >
> > R2
> >
> > interface Loopback0
> > ip address 150.1.2.2 255.255.255.0
> > !
> > interface FastEthernet0/0
> > ip address 183.1.2.2 255.255.255.0
> > duplex auto
> > speed auto
> > !
> > interface FastEthernet0/1
> > no ip address
> > shutdown
> > duplex auto
> > speed auto
> > !
> > interface Serial0/0/0
> > ip address 183.1.123.2 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 183.1.123.1 201 broadcast
> > frame-relay map ip 183.1.123.2 201
> > frame-relay map ip 183.1.123.3 203 broadcast
> > no frame-relay inverse-arp
> > frame-relay lmi-type cisco
> > !
> > interface Serial0/1/0
> > no ip address
> > shutdown
> > !
> > router eigrp 100
> > network 150.1.2.2 0.0.0.0
> > network 183.1.2.2 0.0.0.0
> > network 183.1.123.2 0.0.0.0
> > no auto-summary
> > eigrp router-id 150.1.2.2
> > !
> >
> >
> >
> > On 6/5/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
> > >
> > > Hello Sami,
> > >
> > > Can you do a show frame-relay map on both ends.
> > >
> > > Is the broadcast keyword enabled on both ends?
> > >
> > >
> > > On 6/5/06, Sami < sy1977@gmail.com> wrote:
> > >
> > > > Group,
> > >
> > > I have hub and spoke FR setup , I am trying to run EIGRP on that. Hub
> R2
> > > shows adjaceny with both the spokes R1 and R3 but one of the spokes R1
> > > giving following error.
> > >
> > > R1#
> > > *Jun 5 14:03:28.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > > 183.1.123.2
> > > *Jun 5 14:03:28.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > > *Jun 5 14:03: 28.263: EIGRP: Neighbor(183.1.123.2) not yet found
> > > *Jun 5 14:03:28.807: EIGRP: Sending HELLO on Serial0/0/0
> > > *Jun 5 14:03:28.807: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ
> > > un/rely
> > > 0/0
> > > R1#
> > > *Jun 5 14:03:33.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > > 183.1.123.2
> > > *Jun 5 14:03:33.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > > *Jun 5 14:03:33.263: EIGRP: Neighbor( 183.1.123.2) not yet found
> > > R1#
> > > *Jun 5 14:03:38.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > > 183.1.123.2
> > > *Jun 5 14:03:38.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > > *Jun 5 14:03:38.263: EIGRP: Neighbor(183.1.123.2 ) not yet found
> > > R1#
> > > *Jun 5 14:03:43.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > > 183.1.123.2
> > > *Jun 5 14:03: 43.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > > *Jun 5 14:03:43.263: EIGRP: Neighbor(183.1.123.2) not yet found
> > > R1#
> > > *Jun 5 14:03:48.263: EIGRP: Received UPDATE on Serial0/0/0 nbr
> > > 183.1.123.2
> > > *Jun 5 14:03:48.263: AS 100, Flags 0x1, Seq 14/0 idbQ 0/0
> > > *Jun 5 14:03:48.263: EIGRP: Neighbor(183.1.123.2) not yet found
> > > R1#
> > >
> > > R2#show ip eigrp neighbors
> > > IP-EIGRP neighbors for process 100
> > > H Address Interface Hold Uptime SRTT
> > > RTO Q Seq
> > > (sec) (ms)
> Cnt
> > > Num
> > > 1 183.1.123.1 Se0/0/0 161
> > > 00:01:09 1 5000 1 0
> > > 0 183.1.123.3 Se0/0/0 146 00:14:27 27
> > > 200 0 3
> > > IP-EIGRP neighbors for process 1
> > > R2#
> > > *Jun 5 14:09:51.940: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> > > 183.1.123.1 (Serial0/0/0) is down: retry limit exceeded
> > > R2#
> > > *Jun 5 14:10: 22.080: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> > > 183.1.123.1 (Serial0/0/0) is up: new adjacency
> > > R2#
> > >
> > >
> > > what could be the problem ?
> > >
> > > Thanks,
> > >
> > >
> _______________________________________________________________________
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART