From: Vinu (vinupeter@gmail.com)
Date: Fri Jun 02 2006 - 00:41:54 ART
i have three router in hub n spoke..
r1----- r2----- r3
everything is running sparse mode, r1 loopback 0 joins a group 226.26.26.26,
and config r3 such that r3 loopback 0 is only RP for group
226.26.0.0/16, config r1 also such that r3 is only rp for 226.26.26.26
i configured like this.. i have enables pim-sm on all the interfaces...
r1
(it's frame relay hub n spoke so i made a tunnel n ran sparse mode in it.. )
#ip multicast-routing
ip pim rp-address loopback0 61
ip mroute 0.0.0.0 0.0.0.0 Tunnel0
access-list 61 permit 226.26.26.26
on r3
ip pim rp-address loopback0 60
access-list 61 permit 226.26.0.0 0.0.255.255
will this one work ?
--
Regards,
Vinu
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:31 ART