From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Tue May 23 2006 - 04:52:15 ART
you have policed the whole class for 768K, so this bandwidth will be shared
on 22/05/2006 18:44 Adam Frederick wrote:
> Hi Group
>
>
>
> Have a question about policing w/ MQC. My scenario has a basic router
> (1 outside, 1 inside IP address). The IP range on the inside is all the
> same. However, I have 2 ACL's as below;
>
>
>
>
>
> Access-list 1 permit ip 172.16.24.141
>
> Access-list 1 permit ip 172.16.24.142
>
> Access-list 2 permit ip 172.16.24.143
>
>
>
> Class-map Silver
>
> Match access-group 1
>
>
>
> Class-map Gold
>
> Match access-group 2
>
>
>
>
>
> Policy-map Global
>
> Class Silver
>
> police 768000 5000 conform-action transmit exceed-action drop
>
>
>
> Class Gold
>
> Bandwidth 1000
>
>
>
> Interface Serial0/0/0
>
> Description Outside WAN Interface
>
> Service-policy output Global
>
>
>
>
>
>
>
> My question.... Will the IPs in the ACL 1 "BOTH" be able to use 768000
> independently or will that value be shared among the IPs in the ACL
> (i.e. @ full capacity will each IP only be allowed 384000 or 768000)
>
>
>
> TIA
>
>
> Adam
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART