From: Adam Frederick (AFrederick@homefederalbank.com)
Date: Mon May 22 2006 - 13:44:56 ART
Hi Group
Have a question about policing w/ MQC. My scenario has a basic router
(1 outside, 1 inside IP address). The IP range on the inside is all the
same. However, I have 2 ACL's as below;
Access-list 1 permit ip 172.16.24.141
Access-list 1 permit ip 172.16.24.142
Access-list 2 permit ip 172.16.24.143
Class-map Silver
Match access-group 1
Class-map Gold
Match access-group 2
Policy-map Global
Class Silver
police 768000 5000 conform-action transmit exceed-action drop
Class Gold
Bandwidth 1000
Interface Serial0/0/0
Description Outside WAN Interface
Service-policy output Global
My question.... Will the IPs in the ACL 1 "BOTH" be able to use 768000
independently or will that value be shared among the IPs in the ACL
(i.e. @ full capacity will each IP only be allowed 384000 or 768000)
TIA
Adam
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART