From: Ivan (ivan@iip.net)
Date: Tue May 16 2006 - 12:34:06 ART
this route point to "black hole" therefore if it is acceptable, you can leave
it with default AD 5
Example:
R1 receive default route from OSPF (AD 110)
On R1 configured ip summary-address eigrp 110 0.0.0.0 0.0.0.0
Hence default route will be replaced to black hole.
> Hello
>
> I understand that the following command can be used to summarize EIGRP
> routes.
>
> interface xxx
> ip summary-address eigrp [as-number] [ip address] [subnet mask] [admin
> distance]
>
> When do you need to set admin distance for summary-address? My
> understanding is that admin distance is locally significant number and will
> not be advertised to neighbors.
>
> I cannot figure out why and when I need to set admin distance to summary
> routes.
>
> Can anyone please help?
>
> Thanks
>
> Ken
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART