From: Jian Gu (guxiaojian@gmail.com)
Date: Tue May 16 2006 - 16:38:53 ART
I think the admin distance of summary-address is only important if the
router is receiving default route and at the same time it is also
advertising default route (floating summary).
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hirp_c/
ch07/erconfig.htm#wp1014482
On 5/16/06, Ken <hpnkpn103@yahoo.co.jp> wrote:
>
> Hello
>
> I understand that the following command can be used to summarize EIGRP
> routes.
>
> interface xxx
> ip summary-address eigrp [as-number] [ip address] [subnet mask] [admin
> distance]
>
> When do you need to set admin distance for summary-address? My
> understanding
> is that admin distance is locally significant number and will not be
> advertised to neighbors.
>
> I cannot figure out why and when I need to set admin distance to summary
> routes.
>
> Can anyone please help?
>
> Thanks
>
> Ken
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART