From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon May 15 2006 - 03:49:45 ART
What tasks in particular are you referring to where RIPng is needed on
DLCI 100? Also note that RIPng is enabled on DLCI 101 (subinterface
S0.101).
interface Serial0.101 point-to-point
description PVC 101 to Rack1
ip address 54.1.1.254 255.255.255.0
ip authentication mode eigrp 10 md5
ip authentication key-chain eigrp 10 EIGRP
ipv6 address 2001:54:254:1::254/64
ipv6 address FE80::254 link-local
ipv6 rip RIPng enable
frame-relay interface-dlci 101
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Osmanov Orhan
Sent: Sunday, May 14, 2006 11:24 PM
To: CCIEin2006; Osmanov Orhan
Cc: ccielab@groupstudy.com
Subject: RE: IE volume I BB1 config
No,
In another interfaces has configured RIPng.
this that I paste is original initial configuration and there isn't
enabled RIPng.
_____
From: CCIEin2006 [mailto:ciscocciein2006@gmail.com]
Sent: Friday, May 12, 2006 6:14 PM
To: Osmanov Orhan
Cc: ccielab@groupstudy.com
Subject: Re: IE volume I BB1 config
Maybe the version of code running on the router doesn't support it?
What is the model of router and code?
On 5/12/06, Osmanov Orhan <Orhan.Osmanov@sofk.siemens.bg
<mailto:Orhan.Osmanov@sofk.siemens.bg> > wrote:
Hi group,
I don't see in BB1 config - RIPng enabled on this interface:
interface Serial0.100 point-to-point
description PVC 100 to Rack1
ip address 54.1.2.254 <http://54.1.2.254> 255.255.255.0
<http://255.255.255.0>
ipv6 address 2001:54:1:2::254/64
ipv6 address FE80::254 link-local
frame-relay interface-dlci 100
But there is many tasks that says - have to configure RIPng with BB1.
???
Regards
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART