From: Osmanov Orhan (Orhan.Osmanov@sofk.siemens.bg)
Date: Mon May 15 2006 - 05:40:59 ART
-----Original Message-----
From: Osmanov Orhan
Sent: Monday, May 15, 2006 9:54 AM
To: 'Brian Dennis'
Subject: RE: IE volume I BB1 config
Lab 13 task 7.2 and 7.3
-----Original Message-----
From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
Sent: Monday, May 15, 2006 9:50 AM
To: Osmanov Orhan; CCIEin2006
Cc: ccielab@groupstudy.com
Subject: RE: IE volume I BB1 config
What tasks in particular are you referring to where RIPng is needed on
DLCI 100? Also note that RIPng is enabled on DLCI 101 (subinterface
S0.101).
interface Serial0.101 point-to-point
description PVC 101 to Rack1
ip address 54.1.1.254 255.255.255.0
ip authentication mode eigrp 10 md5
ip authentication key-chain eigrp 10 EIGRP
ipv6 address 2001:54:254:1::254/64
ipv6 address FE80::254 link-local
ipv6 rip RIPng enable
frame-relay interface-dlci 101
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Osmanov Orhan
Sent: Sunday, May 14, 2006 11:24 PM
To: CCIEin2006; Osmanov Orhan
Cc: ccielab@groupstudy.com
Subject: RE: IE volume I BB1 config
No,
In another interfaces has configured RIPng.
this that I paste is original initial configuration and there isn't
enabled RIPng.
_____
From: CCIEin2006 [mailto:ciscocciein2006@gmail.com]
Sent: Friday, May 12, 2006 6:14 PM
To: Osmanov Orhan
Cc: ccielab@groupstudy.com
Subject: Re: IE volume I BB1 config
Maybe the version of code running on the router doesn't support it?
What is the model of router and code?
On 5/12/06, Osmanov Orhan <Orhan.Osmanov@sofk.siemens.bg
<mailto:Orhan.Osmanov@sofk.siemens.bg> > wrote:
Hi group,
I don't see in BB1 config - RIPng enabled on this interface:
interface Serial0.100 point-to-point
description PVC 100 to Rack1
ip address 54.1.2.254 <http://54.1.2.254> 255.255.255.0
<http://255.255.255.0>
ipv6 address 2001:54:1:2::254/64
ipv6 address FE80::254 link-local
frame-relay interface-dlci 100
But there is many tasks that says - have to configure RIPng with BB1.
???
Regards
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART