From: san (san.study@gmail.com)
Date: Mon May 15 2006 - 03:50:27 ART
Juganmagan,
Another wording watch could be, if they say "we cant change the interface
mtu on router, we could change it on switch" to accomplish the task.
I assume your method also is valid as you are not violating the question.
On 5/14/06, juganmagan <juganmagan@yahoo.com> wrote:
>
> Hi Guys,
>
> I came across the adjancy problem in between one router and one 3550
> switch and this adjancy problem was due to MTU mismatch problem.
>
> On switch end MTU size was configured for 1540 and router end it was
> 1500. We can't change the interface MTU size to more then 1500.
>
> I configured
> #ip ospf mtu-ignore
>
> Was it right way for the lab point of view or there is any other method
> availble to change the MTU size.
>
> Thanks
>
>
>
> ---------------------------------
> Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Thanks & Rgds SAN
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART