From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Sat May 13 2006 - 18:11:35 ART
With synchronization enabled, The router needs to learn of a route via an
IGP as well as BGP.
In addition, with OSPF only the ID of the router originating the route in to
OSPF and the ID of the router originating the route in to BGP must also
match.
Chris
On 5/13/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
>
> Hello group,
>
> Please examine the following setup:
>
> 10.1.1.0
> |
> (R2)
> |
> BGP
> |
> (R1)---BGP---(R3)
>
> All three routers are running ospf and iBGP with Synchronization enabled.
> R1 is acting as route reflector for R2 and R3.
>
> Will the 10.1.1.0 network advertised by R2 appear in the BGP table of R3?
> If not please explain why.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART