Re: Built my home lab, after failing lab twice

From: john_gibson_ccie@yahoo.com
Date: Sat May 06 2006 - 12:22:43 ART

• Next message: Stephen Vallois-Davies: "outside-to-inside nat (reversible)"
• Previous message: Bob Sinclair: "Re: Authentication on OSPF Area 0 and VL"
• Maybe in reply to: john_gibson_ccie@yahoo.com: "Built my home lab, after failing lab twice"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Previous posting's text format was messed up.
http://geocities.com/johngibson1541/diagram2.html
has the format.

<pre>
2 x 2610 modular routers
FR is a 2523 as the central frame-relay
All other routers are 2514
Run IRB in routers to replace 3550

3 x 6' serial cable
7 x 3' serial cable
6 x 1' serial cable
12 x cat-5 cross cables to replace the switch

Total spent about 1800USD

Photo http://geocities.com/johngibson1541/photos/00001.jpg

     ----------------------------------------------------
FR | s4 s5 s6 s7 s8 s9 |
    | s0 s1 s2 s3 |
     --------/-------------------------------------------
            / (all other sX--------RX,s0)
           /
     -----/----------------------------------------------
R1 | / e0 e1 s0 s1 |
    | \ / |
     -----\-------------------------/--------------------
           \ /
            \ /
     --------\-------------------/-----------------------
R2 | s1/3 s1/2 s1/1 s1/0 e0/0 |
    | \ |
     -------------------\--------------------------------
                          ---------
                                    \
     --------------------------------\-------------------
R3 | e0 e1 s0 s1 |
    | |
     ----------------------------------------------------

     ----------------------------------------------------
R4 | e0 e1 s0 s1 |
    | | |
     --------------------------------|-------------------
                                     |
     --------------------------------|-------------------
R5 | e0 e1 s0 s1 |
    | |
     ----------------------------------------------------

     ----------------------------------------------------
R6 | e0 e1 s0 s1 |
    | / |
     -------------------------------/--------------------
                                   /
                                  /
     ----------------------------/-----------------------
R7 | s1/3 s1/2 s1/1 s1/0 e0/0 |
    | / \ |
     -------/-------------\------------------------------
           / -------
          / \
     ----/---------------------------\-------------------
R8 | / e0 e1 s0 s1 |
    | \ |
     ----\-----------------------------------------------
           ------------------------
                                    \
     --------------------------------\-------------------
R9 | e0 e1 s0 s1 |
    | |
     ----------------------------------------------------

     ----------------------------------------------------
B1 | e0 e1 s0 s1 |
    | |
     ----------------------------------------------------

     ----------------------------------------------------
B2 | e0 e1 s0 s1 |
    | |
     ----------------------------------------------------

</pre>

• Next message: Stephen Vallois-Davies: "outside-to-inside nat (reversible)"
• Previous message: Bob Sinclair: "Re: Authentication on OSPF Area 0 and VL"
• Maybe in reply to: john_gibson_ccie@yahoo.com: "Built my home lab, after failing lab twice"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART