From: Bob Sinclair (bob@bobsinclair.net)
Date: Sat May 06 2006 - 12:01:52 ART
Taylor,
The virtual link is an Area 0 link; note the output from show ip ospf int.
Make sure to authenticate it following Area 0 requirements.
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: Wang, Ting (Taylor)
To: ccielab@groupstudy.com
Sent: Saturday, May 06, 2006 10:40 AM
Subject: Authentication on OSPF Area 0 and VL
Hi Group,
If the task require on method of the Authentication (e.g. plain text) on
OSPF Area 0. Does it mean the VL need to
use the same authentication? If the none backbone area which the VL
transit across adopt a more secured authentication like MD5, will the
packet for VL still use the plain text? As we know, the VL is just like
a GRE tunnel over the none backbone area.
Thanks,
Taylor
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART