From: Edward (edwlui@gmail.com)
Date: Tue Apr 25 2006 - 17:33:19 GMT-3
Chris,
Seems like you were in the "Router rip" when typing the command ?
Edward
On 4/25/06, chris Iannacone <iannaconec@optonline.net> wrote:
>
> heres the lab
> 137.1.1.0 /24 in the inbound to router1 outbound is 137.1.200.1 out
> frame relay dlci 101 cross the cloud to 137.1.200.2 which is R2
> 1 Configure r1 and r2 to run rip , (ena conf t router rip)
> configure ip address on loopback 1 ( cntl Z interface Lo0
> 172.16.32.1 255.255.255.0
> configure ip address 172.16.33.1 255.255.255.0 on loopback 2
> bad mask ?
> configure a few more ips then start with adding network statments to rip
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3