From: ChicagoCCIE (chicagoccie@yahoo.com)
Date: Tue Apr 25 2006 - 17:20:29 GMT-3
Most probably you have an ip address on another interface in the same router which has created this conflict.
chris Iannacone <iannaconec@optonline.net> wrote: heres the lab
137.1.1.0 /24 in the inbound to router1 outbound is 137.1.200.1 out
frame relay dlci 101 cross the cloud to 137.1.200.2 which is R2
1 Configure r1 and r2 to run rip , (ena conf t router rip)
configure ip address on loopback 1 ( cntl Z interface Lo0
172.16.32.1 255.255.255.0
configure ip address 172.16.33.1 255.255.255.0 on loopback 2
bad mask ?
configure a few more ips then start with adding network statments to rip
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3