From: george stanza (cert2006@gmail.com)
Date: Sat Apr 22 2006 - 13:15:23 GMT-3
i dont see that option either..Any idea ?
r5(config-subif)#ipv6 address FEC0:0:0:EB::5/64 ?
eui-64 Use eui-64 interface identifier
<cr>
//G
On 4/22/06, Petr Lapukhov <petrsoft@gmail.com> wrote:
>
> For example:
>
> R2:
> ===
> interface Serial2/1
> ipv6 address FE80::2 link-local
> frame-relay map ipv6 FE80::5 205
>
> R5:
> ===
>
> interface Serial2/1.235 multipoint
> ipv6 address FE80::5 link-local
> frame-relay map ipv6 FE80::2 502
>
>
> Petr
>
> 2006/4/22, george stanza <cert2006@gmail.com>:
> >
> > hi petr,
> >
> > Any idea how i do that..I am using 12.2(15)T14 version of the IOS and i
> > dont see any command of that sort...Here is all that i have under the
> > frame-relay sub-intf command config..
> >
> >
> > r5(config-subif)#frame-relay map ipv6 ?
> > X:X:X:X::X Protocol specific address
> >
> > thanks and appreciate your help..
> >
> > //George..
> >
> >
> >
> > On 4/22/06, Petr Lapukhov <petrsoft@gmail.com > wrote:
> > >
> > > George,
> > >
> > > It looks like you forgot to map link-local IPv6 addresses on FR
> > > multipoint
> > > interfaces. RIPng uses link-local addresses as next-hop listed in
> > > routing
> > > updates.
> > >
> > > Petr
> > >
> > > 2006/4/22, george stanza <cert2006@gmail.com>:
> > > >
> > > > A simple ipv6 hub & spoke question..
> > > R5 is the hub and R2 is the spoke..
> > > Also, R1 is connected to R2 thru ethernet and R1, R2 & R5 are running
> > > RIPng...
> > >
> > > S0/0 S0/0.25
> > > R1 <----------------> R2 <-----------------> R5
> > > ether frame-relay (hub)
> > >
> > > Can anybody help me why I am able to ping R2's serial i/f connected to
> > > R5
> > > from R1 but not R5.
> > > In simple words i am not able to establish connectivity between R1 &
> > > R5..Am
> > > I missing something ?
> > >
> > > Here is my configuration:
> > > ==================
> > > R1:
> > > ===
> > > ipv6 unicast-routing
> > > ipv6 router rip 1
> > > interface Ethernet2/0.12
> > > ipv6 address FEC0:0:0:C::1/64
> > > ipv6 enable
> > > ipv6 rip 1 enable
> > >
> > > R2:
> > > ===
> > > ipv6 unicast-routing
> > > ipv6 router rip 1
> > > interface Ethernet1/1.12
> > > ipv6 address FEC0:0:0:C::2/64
> > > ipv6 enable
> > > ipv6 rip 1 enable
> > > interface Serial2/1
> > > ipv6 address FEC0:0:0:EB::2/64
> > > ipv6 enable
> > > ipv6 rip 1 enable
> > > frame-relay map ipv6 FEC0:0:0:EB::5 205 broadcast
> > >
> > > R5:
> > > ===
> > > ipv6 unicast-routing
> > > ipv6 router rip 1
> > > interface Serial2/1.235 multipoint
> > > ipv6 address FEC0:0:0:EB::5/64
> > > ipv6 enable
> > > ipv6 rip 1 enable
> > > frame-relay map ipv6 FEC0:0:0:EB::2 502 broadcast
> > >
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3