From: george stanza (cert2006@gmail.com)
Date: Sat Apr 22 2006 - 02:11:37 GMT-3
A simple ipv6 hub & spoke question..
R5 is the hub and R2 is the spoke..
Also, R1 is connected to R2 thru ethernet and R1, R2 & R5 are running
RIPng...
S0/0 S0/0.25
R1 <----------------> R2 <-----------------> R5
ether frame-relay (hub)
Can anybody help me why I am able to ping R2's serial i/f connected to R5
from R1 but not R5.
In simple words i am not able to establish connectivity between R1 & R5..Am
I missing something ?
Here is my configuration:
==================
R1:
===
ipv6 unicast-routing
ipv6 router rip 1
interface Ethernet2/0.12
ipv6 address FEC0:0:0:C::1/64
ipv6 enable
ipv6 rip 1 enable
R2:
===
ipv6 unicast-routing
ipv6 router rip 1
interface Ethernet1/1.12
ipv6 address FEC0:0:0:C::2/64
ipv6 enable
ipv6 rip 1 enable
interface Serial2/1
ipv6 address FEC0:0:0:EB::2/64
ipv6 enable
ipv6 rip 1 enable
frame-relay map ipv6 FEC0:0:0:EB::5 205 broadcast
R5:
===
ipv6 unicast-routing
ipv6 router rip 1
interface Serial2/1.235 multipoint
ipv6 address FEC0:0:0:EB::5/64
ipv6 enable
ipv6 rip 1 enable
frame-relay map ipv6 FEC0:0:0:EB::2 502 broadcast
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3