BGP Link Bandwidth

From: Radoslav Vasilev (deckland@gmail.com)
Date: Sat Apr 22 2006 - 13:26:06 GMT-3

• Next message: Victor Cappuccio: "Re: ipv6 question !!"
• Previous message: george stanza: "Re: ipv6 question !!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,

I have BGP session between 2 AS. Router A in AS50 peers with routers B and C
in AS60.
I'm testing the BGP Link Bandwidth feature and everything works fine:

RouterA#sib 192.168.0.0
BGP routing table entry for 192.168.0.0/24, version 3
Paths: (2 available, best #1, table Default-IP-Routing-Table)
Multipath: eBGP iBGP
  Advertised to non peer-group peers:
  10.1.1.6
  60
    10.1.1.7 from 10.1.1.7 (10.1.1.7)
      Origin IGP, metric 0, localpref 100, valid, external, multipath, best
      DMZ-Link Bw 12500 kbytes
  60
    10.1.1.6 from 10.1.1.6 (138.10.6.6)
      Origin IGP, metric 0, localpref 100, valid, external, multipath
      DMZ-Link Bw 12500 kbytes

I want now to change the advertised BW from 10.1.1.7 (Router C). I tried
with changing the interface bandwidth on Router C, but the route from it is
still reflecting the default bandiwdth (100Mbit/s in KBytes = 12500).

Any idea how i can change it?

Thanks!
Rado

• Next message: Victor Cappuccio: "Re: ipv6 question !!"
• Previous message: george stanza: "Re: ipv6 question !!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3