From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Tue Apr 18 2006 - 08:42:57 GMT-3
From my knowledge "switchport voice vla" does it for you... no? It will
form dot1q trunking with IP phone and use access vlan as untagged....
on 12/04/2006 23:54 Brad Ellis wrote:
> Are you connecting a phone to the switch port? If so, you'll want to
> configure the port for trunking mode, and NOT access mode.
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> brad@ccbootcamp.com
> www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
> CCIE Voice Lab Workbook - Now Shipping!
>
> ----- Original Message ----- From: "Melwani, Manoj J"
> <melwanim@citigroup.com>
> To: "CCIE Group Study (E-mail)" <ccielab@groupstudy.com>
> Sent: Wednesday, April 12, 2006 1:52 PM
> Subject: Leaving the switchport to dynamic for Voice VLANS or making
> itaccess on 3550 [bcc][faked-from]
>
>
> Can some one suggest if we should leave the switchport in dynamic mode
> or change it to access while configuring Voice VLAN's or it doesnt
> matter?
>
> interface FastEthernet0/11
> switchport access vlan 5
> switchport mode dynamic desirable
> switchport voice vlan dot1p
> switchport priority extend cos 3
> mls qos trust cos
> spanning-tree portfast
>
>
> OR
>
> interface FastEthernet0/11
> switchport access vlan 5
> switchport mode access
> switchport voice vlan dot1p
> switchport priority extend cos 3
> mls qos trust cos
> spanning-tree portfast
>
>
>
> thanks,
> Manoj.
>
>
>
> Manoj J. Melwani
> Citigroup - Extranet Network Integration
> Phone: (212) 291-3189
> Email: melwanim@citigroup.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3