From: Brad Ellis (brad@ccbootcamp.com)
Date: Wed Apr 12 2006 - 18:54:08 GMT-3
Are you connecting a phone to the switch port? If so, you'll want to
configure the port for trunking mode, and NOT access mode.
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
CCIE Voice Lab Workbook - Now Shipping!
----- Original Message -----
From: "Melwani, Manoj J" <melwanim@citigroup.com>
To: "CCIE Group Study (E-mail)" <ccielab@groupstudy.com>
Sent: Wednesday, April 12, 2006 1:52 PM
Subject: Leaving the switchport to dynamic for Voice VLANS or making
itaccess on 3550 [bcc][faked-from]
Can some one suggest if we should leave the switchport in dynamic mode or
change it to access while configuring Voice VLAN's or it doesnt matter?
interface FastEthernet0/11
switchport access vlan 5
switchport mode dynamic desirable
switchport voice vlan dot1p
switchport priority extend cos 3
mls qos trust cos
spanning-tree portfast
OR
interface FastEthernet0/11
switchport access vlan 5
switchport mode access
switchport voice vlan dot1p
switchport priority extend cos 3
mls qos trust cos
spanning-tree portfast
thanks,
Manoj.
Manoj J. Melwani
Citigroup - Extranet Network Integration
Phone: (212) 291-3189
Email: melwanim@citigroup.com
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3