From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sun Apr 16 2006 - 17:32:27 GMT-3
Did you disable auto-summary under EIGRP?
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Mohammed Shameen Abdul Jabbar
> Sent: Sunday, April 16, 2006 2:19 PM
> To: Cisco certification
> Subject: IEWB VER3.0 LAB-2 TASK-4.6
>
> Hi,
>
> I am using the IEWB VER3.0. Doing LAB-2 TASK-4.6.
> It requires to do a " ip summary-address eigrp ..." command under a
> ethernet
> sub-interface.
> The problem i face is that , I am not able to see the route I am
> summarising in the routing table of other routers,
> I followed the solution guide also, but not able to get it work.
> In the lab workbook it is dome on a Gigabit ethernet sub interface
where
> as
> I am using normal ethernet sub-interface. Will this be of any
> implications?.
>
> Regards
> shamin
>
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3