From: Nick Griffin (ngriffin@sio.midco.net)
Date: Sat Apr 15 2006 - 10:18:44 GMT-3
You'll need DSP resources on the mainboard via PVDM2's or a slot in a
NM-HDV with DSP resources to get the card working.
Brad Ellis wrote:
> Heck of a good question. I'm leaning towards, yes, that's what you
> need, but I'm not 100% certain. do you have a pvdm2 that you can try?
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> brad@ccbootcamp.com
> www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
> www.ccbootcamp.com/ccievoicelw.html (CCIE Voice Lab Workbook)
>
> ----- Original Message ----- From: "Thonas Cheung"
> <thomascheung2003@hotmail.com>
> To: "Brad Ellis" <brad@ccbootcamp.com>; <ccielab@groupstudy.com>
> Sent: Saturday, April 15, 2006 2:29 AM
> Subject: Re: OT: vic2-2fxo not function in 2811
>
>
> Hi Brad,
>
> Thank you for your reply.
>
> I have no dsp on the motherbroad but have a NM-HDV network module that
> has
> dsp (PVDM-12).
>
> Is PVDM2 needed for the module?
>
> Thomas
>
> ----- Original Message ----- From: "Brad Ellis" <brad@ccbootcamp.com>
> To: "Thomas Cheung" <thomascheung2003@hotmail.com>;
> <ccielab@groupstudy.com>
> Sent: Saturday, April 15, 2006 10:39 AM
> Subject: Re: vic2-2fxo not function in 2811 [bcc][faked-from]
>
>
>> What kind of DSP resources do you have in the router? (ie PVDM2s?)
>>
>> thanks,
>> Brad Ellis
>> CCIE#5796 (R&S / Security)
>> CCSI#30482
>> Network Learning Inc - A Cisco Learning Partner (CLP)
>> brad@ccbootcamp.com
>> www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
>> Voice: 702-968-5100
>> FAX: 702-446-8012
>> ----- Original Message ----- From: "Thonas Cheung"
>> <thomascheung2003@hotmail.com>
>> To: <ccielab@groupstudy.com>
>> Sent: Saturday, April 15, 2006 2:04 AM
>> Subject: OT: vic2-2fxo not function in 2811 [bcc][faked-from]
>>
>>
>> Hi,
>>
>> This may be a stupid question, but I can't figure it out.
>>
>> A vic2-2fxo is inserted in 2811, I can see it in the "show version" and
>> "show
>> diag"
>> , but cannot see it in the "show run" and thus cannot configure it.
>>
>> The card has amber light on both fxo ports.
>> Could anyone help to show how to make them work? Thank you very much.
>>
>> Here are the outputs from the commands:
>>
>> r2811#show run
>> !
>> no network-clock-participate slot 1
>> voice-card 0
>> no dspfarm
>> !
>> voice-card 1
>> dspfarm
>> !
>>
>> controller T1 1/0/0
>> framing esf
>> linecode b8zs
>> ds0-group 1 timeslots 1-24 type e&m-immediate-start
>> !
>> voice-port 1/0/0:1
>> !
>> !
>>
>>
>> r2811#sh ver
>> Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
>> 12.4(7),
>> RELEASE SOFTWARE (fc6)
>> Technical Support: http://www.cisco.com/techsupport
>> Copyright (c) 1986-2006 by Cisco Systems, Inc.
>> Compiled Wed 01-Mar-06 07:23 by alnguyen
>>
>> ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>>
>> r2811 uptime is 26 minutes
>> System returned to ROM by power-on
>> System image file is "flash:c2800nm-adventerprisek9-mz.124-7.bin"
>>
>>
>> This product contains cryptographic features and is subject to United
>> States and local country laws governing import, export, transfer and
>> use. Delivery of Cisco cryptographic products does not imply
>> third-party authority to import, export, distribute or use encryption.
>> Importers, exporters, distributors and users are responsible for
>> compliance with U.S. and local country laws. By using this product you
>> agree to comply with applicable laws and regulations. If you are unable
>> to comply with U.S. and local laws, return this product immediately.
>>
>> A summary of U.S. laws governing Cisco cryptographic products may be
>> found
>> at:
>> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>>
>> If you require further assistance please contact us by sending email to
>> export@cisco.com.
>>
>> Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.
>> Processor board ID FTX0925A1PU
>> 2 FastEthernet interfaces
>> 1 Channelized T1/PRI port
>> 1 Virtual Private Network (VPN) Module
>> 2 Voice FXO interfaces
>> DRAM configuration is 64 bits wide with parity enabled.
>> 239K bytes of non-volatile configuration memory.
>> 62720K bytes of ATA CompactFlash (Read/Write)
>>
>> Configuration register is 0x2102
>>
>>
>> r2811#sh diag
>> Slot 0:
>> C2811 Motherboard with 2FE and integrated VPN Port adapter, 2
>> ports
>> Port adapter is analyzed
>> Port adapter insertion time unknown
>> Onboard VPN : v2.2.0
>> EEPROM contents at hardware discovery:
>> PCB Serial Number : FOC09162NT7
>> Hardware Revision : 3.0
>> Top Assy. Part Number : 800-21849-04
>> Board Revision : A1
>> Deviation Number : 0
>> Fab Version : 06
>> RMA Test History : 00
>> RMA Number : 0-0-0-0
>> RMA History : 00
>> Processor type : 87
>> Hardware date code : 20050424
>> Chassis Serial Number : FTX0925A1PU
>> Chassis MAC Address : 0013.c47c.2490
>> MAC Address block size : 24
>> CLEI Code : CNMJ7N0BRB
>> Product (FRU) Number : CISCO2811
>> Part Number : 73-7214-10
>> Version Identifier : V01
>> EEPROM format version 4
>> EEPROM contents (hex):
>> 0x00: 04 FF C1 8B 46 4F 43 30 39 31 36 32 4E 54 37 40
>> 0x10: 03 E7 41 03 00 C0 46 03 20 00 55 59 04 42 41 31
>> 0x20: 88 00 00 00 00 02 06 03 00 81 00 00 00 00 04 00
>> 0x30: 09 87 83 01 31 F1 F8 C2 8B 46 54 58 30 39 32 35
>> 0x40: 41 31 50 55 C3 06 00 13 C4 7C 24 90 43 00 18 C6
>> 0x50: 8A 43 4E 4D 4A 37 4E 30 42 52 42 CB 8F 43 49 53
>> 0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 1C 2E
>> 0x70: 0A 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF
>>
>> WIC Slot 2:
>> 2nd generation - FXO Voice daughter card (2 port)
>> Hardware Revision : 5.0
>> Top Assy. Part Number : 800-21597-01
>> Board Revision : E0
>> Deviation Number : 0-0
>> Fab Version : 04
>> PCB Serial Number : FOC09301FBX
>> RMA Test History : 00
>> RMA Number : 0-0-0-0
>> RMA History : 00
>> Version Identifier : V
>> Product (FRU) Number : VIC2-2FXO=
>> EEPROM format version 4
>> EEPROM contents (hex):
>> 0x00: 04 FF 40 00 4D 41 05 00 C0 46 03 20 00 54 5D 01
>> 0x10: 42 45 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 30
>> 0x20: 39 33 30 31 46 42 58 03 00 81 00 00 00 00 04 00
>> 0x30: 89 56 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
>> 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3