From: Thonas Cheung (thomascheung2003@hotmail.com)
Date: Fri Apr 14 2006 - 23:36:34 GMT-3
Hi,
This may be a stupid question, but I can't figure it out.
A vic2-2fxo is inserted in 2811, I can see it in the "show version" and "show
diag"
, but cannot see it in the "show run" and thus cannot configure it.
The card has amber light on both fxo ports.
Could anyone help to show how to make them work? Thank you very much.
Here are the outputs from the commands:
r2811#show run
!
no network-clock-participate slot 1
voice-card 0
no dspfarm
!
voice-card 1
dspfarm
!
controller T1 1/0/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-immediate-start
!
voice-port 1/0/0:1
!
!
r2811#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(7),
RELEASE SOFTWARE (fc6)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 01-Mar-06 07:23 by alnguyen
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
r2811 uptime is 26 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.124-7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.
Processor board ID FTX0925A1PU
2 FastEthernet interfaces
1 Channelized T1/PRI port
1 Virtual Private Network (VPN) Module
2 Voice FXO interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
r2811#sh diag
Slot 0:
C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time unknown
Onboard VPN : v2.2.0
EEPROM contents at hardware discovery:
PCB Serial Number : FOC09162NT7
Hardware Revision : 3.0
Top Assy. Part Number : 800-21849-04
Board Revision : A1
Deviation Number : 0
Fab Version : 06
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 87
Hardware date code : 20050424
Chassis Serial Number : FTX0925A1PU
Chassis MAC Address : 0013.c47c.2490
MAC Address block size : 24
CLEI Code : CNMJ7N0BRB
Product (FRU) Number : CISCO2811
Part Number : 73-7214-10
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 30 39 31 36 32 4E 54 37 40
0x10: 03 E7 41 03 00 C0 46 03 20 00 55 59 04 42 41 31
0x20: 88 00 00 00 00 02 06 03 00 81 00 00 00 00 04 00
0x30: 09 87 83 01 31 F1 F8 C2 8B 46 54 58 30 39 32 35
0x40: 41 31 50 55 C3 06 00 13 C4 7C 24 90 43 00 18 C6
0x50: 8A 43 4E 4D 4A 37 4E 30 42 52 42 CB 8F 43 49 53
0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 1C 2E
0x70: 0A 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF
WIC Slot 2:
2nd generation - FXO Voice daughter card (2 port)
Hardware Revision : 5.0
Top Assy. Part Number : 800-21597-01
Board Revision : E0
Deviation Number : 0-0
Fab Version : 04
PCB Serial Number : FOC09301FBX
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Version Identifier : V
Product (FRU) Number : VIC2-2FXO=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 4D 41 05 00 C0 46 03 20 00 54 5D 01
0x10: 42 45 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 30
0x20: 39 33 30 31 46 42 58 03 00 81 00 00 00 00 04 00
0x30: 89 56 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3