From: Thonas Cheung (thomascheung2003@hotmail.com)
Date: Sat Apr 15 2006 - 00:01:24 GMT-3
Hi Brad,
Thank you for your reply.
I have no dsp on the motherbroad but have a NM-HDV network module that has
dsp (PVDM-12).
Is PVDM2 needed for the module?
Thomas
----- Original Message -----
From: "Brad Ellis" <brad@ccbootcamp.com>
To: "Thomas Cheung" <thomascheung2003@hotmail.com>; <ccielab@groupstudy.com>
Sent: Saturday, April 15, 2006 10:39 AM
Subject: Re: vic2-2fxo not function in 2811 [bcc][faked-from]
> What kind of DSP resources do you have in the router? (ie PVDM2s?)
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> Network Learning Inc - A Cisco Learning Partner (CLP)
> brad@ccbootcamp.com
> www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
> Voice: 702-968-5100
> FAX: 702-446-8012
> ----- Original Message -----
> From: "Thonas Cheung" <thomascheung2003@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, April 15, 2006 2:04 AM
> Subject: OT: vic2-2fxo not function in 2811 [bcc][faked-from]
>
>
> Hi,
>
> This may be a stupid question, but I can't figure it out.
>
> A vic2-2fxo is inserted in 2811, I can see it in the "show version" and
> "show
> diag"
> , but cannot see it in the "show run" and thus cannot configure it.
>
> The card has amber light on both fxo ports.
> Could anyone help to show how to make them work? Thank you very much.
>
> Here are the outputs from the commands:
>
> r2811#show run
> !
> no network-clock-participate slot 1
> voice-card 0
> no dspfarm
> !
> voice-card 1
> dspfarm
> !
>
> controller T1 1/0/0
> framing esf
> linecode b8zs
> ds0-group 1 timeslots 1-24 type e&m-immediate-start
> !
> voice-port 1/0/0:1
> !
> !
>
>
> r2811#sh ver
> Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
> 12.4(7),
> RELEASE SOFTWARE (fc6)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Wed 01-Mar-06 07:23 by alnguyen
>
> ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>
> r2811 uptime is 26 minutes
> System returned to ROM by power-on
> System image file is "flash:c2800nm-adventerprisek9-mz.124-7.bin"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export@cisco.com.
>
> Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.
> Processor board ID FTX0925A1PU
> 2 FastEthernet interfaces
> 1 Channelized T1/PRI port
> 1 Virtual Private Network (VPN) Module
> 2 Voice FXO interfaces
> DRAM configuration is 64 bits wide with parity enabled.
> 239K bytes of non-volatile configuration memory.
> 62720K bytes of ATA CompactFlash (Read/Write)
>
> Configuration register is 0x2102
>
>
> r2811#sh diag
> Slot 0:
> C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports
> Port adapter is analyzed
> Port adapter insertion time unknown
> Onboard VPN : v2.2.0
> EEPROM contents at hardware discovery:
> PCB Serial Number : FOC09162NT7
> Hardware Revision : 3.0
> Top Assy. Part Number : 800-21849-04
> Board Revision : A1
> Deviation Number : 0
> Fab Version : 06
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Processor type : 87
> Hardware date code : 20050424
> Chassis Serial Number : FTX0925A1PU
> Chassis MAC Address : 0013.c47c.2490
> MAC Address block size : 24
> CLEI Code : CNMJ7N0BRB
> Product (FRU) Number : CISCO2811
> Part Number : 73-7214-10
> Version Identifier : V01
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF C1 8B 46 4F 43 30 39 31 36 32 4E 54 37 40
> 0x10: 03 E7 41 03 00 C0 46 03 20 00 55 59 04 42 41 31
> 0x20: 88 00 00 00 00 02 06 03 00 81 00 00 00 00 04 00
> 0x30: 09 87 83 01 31 F1 F8 C2 8B 46 54 58 30 39 32 35
> 0x40: 41 31 50 55 C3 06 00 13 C4 7C 24 90 43 00 18 C6
> 0x50: 8A 43 4E 4D 4A 37 4E 30 42 52 42 CB 8F 43 49 53
> 0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 1C 2E
> 0x70: 0A 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF
>
> WIC Slot 2:
> 2nd generation - FXO Voice daughter card (2 port)
> Hardware Revision : 5.0
> Top Assy. Part Number : 800-21597-01
> Board Revision : E0
> Deviation Number : 0-0
> Fab Version : 04
> PCB Serial Number : FOC09301FBX
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Version Identifier : V
> Product (FRU) Number : VIC2-2FXO=
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 00 4D 41 05 00 C0 46 03 20 00 54 5D 01
> 0x10: 42 45 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 30
> 0x20: 39 33 30 31 46 42 58 03 00 81 00 00 00 00 04 00
> 0x30: 89 56 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
> 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3