From: PANDI MOORTHY (moorthypandi@gmail.com)
Date: Fri Apr 14 2006 - 10:35:58 GMT-3
Hi Group,
This is question relate to the RSH.
The router R1 (10.1.1.1) and R2 (10.1.1.2) is on the same LAN. I am trying
to get the routing table of R1 from R2 by using RSH.
My config:
R1:
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
ip rcmd rsh-enable
ip rcmd remote-host R1 10.1.1.2 R2 enable
R2:
interface Ethernet0
ip address 10.1.1.2 255.255.255.0
ip rcmd rsh-enable
From R2: I try to run rsh
"rsh 10.1.1.1 /R1 show ip route
But the output I am getting is "permission denied"
Is there any problem with my configuration?
Regards.
Pandi
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3