From: PANDI MOORTHY (moorthypandi@gmail.com)
Date: Fri Apr 14 2006 - 22:11:23 GMT-3
Great, it works now. Thank you Reinhold.
Regards.
Pandi
On 4/15/06, Reinhold Fischer <Reinhold.Fischer@gmx.net> wrote:
>
> Hi Pandi,
>
> the command on R2 should be: rsh 10.1.1.1 /user R1 show ip route
>
> Your config looks ok to me.
>
> regards
>
> reinhold
>
> On Fri, Apr 14, 2006 at 09:35:58PM +0800, PANDI MOORTHY wrote:
> > Hi Group,
> >
> > This is question relate to the RSH.
> >
> > The router R1 (10.1.1.1) and R2 (10.1.1.2) is on the same LAN. I am
> trying
> > to get the routing table of R1 from R2 by using RSH.
> >
> > My config:
> >
> > R1:
> > interface Ethernet0
> > ip address 10.1.1.1 255.255.255.0
> >
> > ip rcmd rsh-enable
> > ip rcmd remote-host R1 10.1.1.2 R2 enable
> >
> > R2:
> >
> > interface Ethernet0
> > ip address 10.1.1.2 255.255.255.0
> >
> > ip rcmd rsh-enable
> >
> >
> > >From R2: I try to run rsh
> >
> > "rsh 10.1.1.1 /R1 show ip route
> >
> > But the output I am getting is "permission denied"
> >
> > Is there any problem with my configuration?
> >
> > Regards.
> > Pandi
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3