From: Petr Lapukhov (petrsoft@gmail.com)
Date: Wed Apr 05 2006 - 04:31:39 GMT-3
Hello,
Provide your configuration snapshot, please.
You probably forget to use "overload" keyword,
or something :)
Petr
2006/4/5, Mohammed Shameen Abdul Jabbar <ccie.xpert@gmail.com>:
>
> Hi everyone,
>
> I am doin my IE labs.
>
> Host network -------- R3 ---EBGP--- BB3
>
> In the scenario I am in , it requires me to configure a NAT on R3 so
> that any IP behind R3 can communicate with BB3 but BB3 can only
> communicate with the IP's behind R3 only if a communication was
> initiated by hosts behind R3.
>
> If NAT is not configured everything works perfectly. The bgp session
> is established , the networks are advertised as required. But as soon
> as NAT is configured , the BGP session drops. And i loose all my
> NLRI's
>
> I know there's something wrong i am doing. I will just go through
> examples of BGP on www.cisco.com and will try to find out. Any inputs
> will be highly appreciated.
>
> regards
> shamin
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3