From: Jens Petter Eikeland (jenseike@start.no)
Date: Wed Apr 05 2006 - 04:51:25 GMT-3
HI all,
I am trying to figure out a solution where I need to Do some bridging for
several xDSL customers.
We have a ppp tunnel coming in on our g0/3 interface that are coming from
our providers POP router
This is a L2TP tunnel. This is the setup :
CPE----PPoA-----Dslam----POP--------------------POP-----------------Our
router-----------Internet
X-------------------PPP-----------X-----------------------L2TP--------------
---------X
The users at the CPE device is setting ip a PPP tunnel for authentication
against radius.. Both are the POP location and
our location. Then a L2TP tunnel is formed from incoming POP (LAC) to our
(LNS) router.
On the LNS I am configuring this :
Interface g0/3
Ip address 10.1.1.1 255.255.255.255
Vlan-range dotq 1 2
Bridge-group 6
Vlan-range dotq 3 4
Bridge-group 7
Interface BVI 6
Ip address 1.1.1.1 255.255.255.0
Interface BVI 7
Ip address 2.2.2.2 255.255.255.0
I am not sure if this will work. It is not tested yet, but If on the
incoming POP
I was able to tag the packets with a vlan tag, should this not be working
smoothly??
ANY advice about this or other method to do this is very much apreaciated
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3