IEWB - VOL 1 , LAB 1 , Q 12.8

From: Mohammed Shameen Abdul Jabbar (ccie.xpert@gmail.com)
Date: Wed Apr 05 2006 - 04:25:44 GMT-3

Hi everyone,

I am doin my IE labs.

                  Host network -------- R3 ---EBGP--- BB3

In the scenario I am in , it requires me to configure a NAT on R3 so
that any IP behind R3 can communicate with BB3 but BB3 can only
communicate with the IP's behind R3 only if a communication was
initiated by hosts behind R3.

If NAT is not configured everything works perfectly. The bgp session
is established , the networks are advertised as required. But as soon
as NAT is configured , the BGP session drops. And i loose all my
NLRI's

I know there's something wrong i am doing. I will just go through
examples of BGP on www.cisco.com and will try to find out. Any inputs
will be highly appreciated.

regards
shamin

This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3