From: magmax (magmax@bigpond.net.au)
Date: Sun Mar 26 2006 - 08:40:46 GMT-3
Can you send me output of these commands
Show ip eigrp neighbours
Show frame-relay PVC | in DLCI
Also you should double check config on frame-relay switch
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joshua
Sent: Sunday, 26 March 2006 9:15 PM
To: ccielab@groupstudy.com
Subject: IP-EIGRP(Default-IP-Routing-Table:10): Neighbor 54.1.3.254 not on
common subnet for Serial0/0
Hi, Group,
In IEWB 3.0 Lab 2 14.4, after i enable EIGRP btw R6 & BB1, this alarm
repeat.
"*Mar 3 09:56:05.475: IP-EIGRP(Default-IP-Routing-Table:10): Neighbor
54.1.10.254 not on common subnet for Serial0/0
Rack1R6#
*Mar 3 09:56:19.295: IP-EIGRP(Default-IP-Routing-Table:10): Neighbor
54.1.3.254 not on common subnet for Serial0/0
"
Rack1R6#sh run
...
interface Serial0/0
ip address 54.1.2.6 255.255.255.0
encapsulation frame-relay
no dce-terminal-timing-enable
frame-relay map ip 54.1.2.254 100 broadcast
no frame-relay inverse-arp
...
router eigrp 10
network 54.1.2.6 0.0.0.0
network 132.1.26.6 0.0.0.0
no auto-summary
eigrp router-id 150.1.6.6
neighbor 132.1.26.2 Ethernet0/0.26
BB1#sh run
....
interface Serial0
description Serial to FRS
no ip address
encapsulation frame-relay
no fair-queue
!
interface Serial0.51 point-to-point
description PVC 51 to Rack1
ip address 54.1.3.254 255.255.255.0
frame-relay interface-dlci 51
!
interface Serial0.100 point-to-point
description PVC 100 to Rack1
ip address 54.1.2.254 255.255.255.0
ipv6 address 2001:54:1:2::254/64
ipv6 address FE80::254 link-local
frame-relay interface-dlci 100
!
interface Serial0.101 point-to-point
description PVC 101 to Rack1
ip address 54.1.1.254 255.255.255.0
ip authentication mode eigrp 10 md5
ip authentication key-chain eigrp 10 EIGRP
ipv6 address 2001:54:254:1::254/64
ipv6 address FE80::254 link-local
ipv6 rip RIPng enable
frame-relay interface-dlci 101
.....
What did i do wrong?
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3