From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Mar 26 2006 - 09:05:20 GMT-3
Hello all,
I have just configured in a Point to Point Link, PPP Authentication
between 2 Routers, say R4 (se0/1) === (se0/1) R5.
Defining R4 as the Authenticator in this scenario, should make R5 look
in his local database, but it seems not to be doing this at all--
Im missing something here??
Thanks
Victor.
Rack1R5#conf te
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R5(config)#interface se0/1
Rack1R5(config-if)#sh
Rack1R5(config-if)#
*Mar 1 02:59:20.110: %LINK-5-CHANGED: Interface Serial0/1, changed state
to administratively down
*Mar 1 02:59:21.112: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0/1, changed state to down
Rack1R5(config-if)#no sh
Rack1R5(config-if)#
*Mar 1 02:59:26.961: %LINK-3-UPDOWN: Interface Serial0/1, changed state
to up
Rack1R5(config-if)#
*Mar 1 02:59:26.961: Se0/1 PPP: Using default call direction
*Mar 1 02:59:26.961: Se0/1 PPP: Treating connection as a dedicated line
*Mar 1 02:59:26.961: Se0/1 PPP: Authorization required
*Mar 1 02:59:26.965: Se0/1 PPP: No authorization without authentication
*Mar 1 02:59:26.965: Se0/1 CHAP: I CHALLENGE id 89 len 26 from "RACK4"
*Mar 1 02:59:26.969: Se0/1 CHAP: Using hostname from interface CHAP
*Mar 1 02:59:26.973: Se0/1 CHAP: Using password from AAA
*Mar 1 02:59:26.973: Se0/1 CHAP: O RESPONSE id 89 len 23 from "R5"
*Mar 1 02:59:26.985: Se0/1 CHAP: I SUCCESS id 89 len 4
Rack1R5(config-if)#
*Mar 1 02:59:27.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0/1, changed state to up
Rack1R5(config-if)#no username RACK4
Rack1R5(config)#int se 0/1
Rack1R5(config-if)#sh
Rack1R5(config-if)#no sh
*Mar 1 03:00:08.241: %LINK-5-CHANGED: Interface Serial0/1, changed state
to administratively down
*Mar 1 03:00:09.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0/1, changed state to down
Rack1R5(config-if)#no sh
Rack1R5(config-if)#
*Mar 1 03:00:13.442: %LINK-3-UPDOWN: Interface Serial0/1, changed state
to up
Rack1R5(config-if)#
*Mar 1 03:00:13.442: Se0/1 PPP: Using default call direction
*Mar 1 03:00:13.442: Se0/1 PPP: Treating connection as a dedicated line
*Mar 1 03:00:13.442: Se0/1 PPP: Authorization required
*Mar 1 03:00:13.446: Se0/1 PPP: No authorization without authentication
*Mar 1 03:00:13.446: Se0/1 CHAP: I CHALLENGE id 90 len 26 from "RACK4"
*Mar 1 03:00:13.450: Se0/1 CHAP: Using hostname from interface CHAP
*Mar 1 03:00:13.454: Se0/1 CHAP: Using password from interface CHAP
*Mar 1 03:00:13.454: Se0/1 CHAP: O RESPONSE id 90 len 23 from "R5"
*Mar 1 03:00:13.466: Se0/1 CHAP: I SUCCESS id 90 len 4
Rack1R5(config-if)#
*Mar 1 03:00:14.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0/1, changed state to up
Rack1R5(config-if)#do show run | in username
Rack1R5(config-if)#
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3