RE: multilink PPPoFR

From: ZeroFlash (Fire_Ice@verizon.net)
Date: Thu Mar 16 2006 - 10:19:28 GMT-3

• Next message: Aaron T. Woland: "RE: VTP client overwriting server ?"
• Previous message: Schulz, Dave: "RE: Frame-relay BW statement question"
• Maybe in reply to: Venkatesh Palani: "multilink PPPoFR"
• Next in thread: Venkatesh Palani: "Re: multilink PPPoFR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

On the parent serials you need the frame-relay traffic shaping command. Is
that there because I don't see it in the configurations

thanks

ZeroFlash
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Venkatesh Palani
Sent: Thursday, March 16, 2006 6:48 AM
To: Petr Lapukhov
Cc: Ivan; CCIE LAB
Subject: Re: multilink PPPoFR

HI Petr
Thanks!
this is one of the link I was looking at but I dont understand why only the
HUB R3 is giving this error where as not the others
- Venkatesh

On 3/16/06, Petr Lapukhov <petrsoft@gmail.com> wrote:
>
> Hello guys,
>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c
/
part30/ch05/qslfifr.htm
>
> this link explains MLPoFR quite well
> "...Before using Multilink PPP over Frame Relay, FRTS must be enabled...."

• Next message: Aaron T. Woland: "RE: VTP client overwriting server ?"
• Previous message: Schulz, Dave: "RE: Frame-relay BW statement question"
• Maybe in reply to: Venkatesh Palani: "multilink PPPoFR"
• Next in thread: Venkatesh Palani: "Re: multilink PPPoFR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3