From: Venkatesh Palani (kvpalani@gmail.com)
Date: Thu Mar 16 2006 - 10:38:24 GMT-3
my question is Why only the hub side is displaying the error message not
the spokes though both of them are using multilink PPPoFR?
- Venkatesh
On 3/16/06, ZeroFlash <Fire_Ice@verizon.net> wrote:
>
>
> On the parent serials you need the frame-relay traffic shaping command. Is
> that there because I don't see it in the configurations
>
> thanks
>
>
> ZeroFlash
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Venkatesh Palani
> Sent: Thursday, March 16, 2006 6:48 AM
> To: Petr Lapukhov
> Cc: Ivan; CCIE LAB
> Subject: Re: multilink PPPoFR
>
> HI Petr
> Thanks!
> this is one of the link I was looking at but I dont understand why only
> the
> HUB R3 is giving this error where as not the others
> - Venkatesh
>
>
> On 3/16/06, Petr Lapukhov <petrsoft@gmail.com> wrote:
> >
> > Hello guys,
> >
> >
> >
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c
> /
> part30/ch05/qslfifr.htm
> >
> > this link explains MLPoFR quite well
> > "...Before using Multilink PPP over Frame Relay, FRTS must be
> enabled...."
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3