From: Venkatesh Palani (kvpalani@gmail.com)
Date: Thu Mar 16 2006 - 07:45:41 GMT-3
Hi,
here is the config
it is between r3,r4 adn r5
R3
interface Multilink1
ip address 145.1.0.3 255.255.255.0
ppp multilink
ppp multilink group 1
!
interface Multilink2
ip address 145.1.0.3 255.255.255.0
ppp multilink
ppp multilink group 2
interface Serial1/0.304 point-to-point
frame-relay interface-dlci 304 ppp Virtual-Template2
!
interface Serial1/0.305 point-to-point
frame-relay interface-dlci 305 ppp Virtual-Template1
!
interface Virtual-Template1
no ip address
ppp multilink
ppp multilink group 1
!
interface Virtual-Template2
no ip address
ppp multilink
ppp multilink group 2
router R4
interface Multilink1
ip address 145.1.0.4 255.255.255.0
ppp multilink
ppp multilink group 1
!
interface Multilink2
ip address 145.1.0.4 255.255.255.0
ppp multilink
ppp multilink group 2
!
interface Ethernet0/0
ip address 145.1.47.4 255.255.255.0
half-duplex
!
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.403 point-to-point
frame-relay interface-dlci 403 ppp Virtual-Template1
!
interface Serial0/0.413 point-to-point
frame-relay interface-dlci 413 ppp Virtual-Template2
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
interface Serial0/1
no ip address
encapsulation frame-relay
no keepalive
!
interface Virtual-Template1
no ip address
ppp multilink group 1
!
interface Virtual-Template2
no ip address
ppp multilink
ppp multilink group 2
!
R5
interface Multilink1
ip address 145.1.0.5 255.255.255.0
ppp multilink
ppp multilink group 1
!
interface Multilink2
ip address 145.1.0.5 255.255.255.0
ppp multilink
ppp multilink group 2
!
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.503 point-to-point
frame-relay interface-dlci 503 ppp Virtual-Template1
!
interface Serial0/0.513 point-to-point
frame-relay interface-dlci 513 ppp Virtual-Template2
interface Virtual-Template1
no ip address
ppp multilink
ppp multilink group 1
!
interface Virtual-Template2
no ip address
ppp multilink
ppp multilink group 2
_ venkatesh
On 3/16/06, Alexei Monastyrnyi <alexeim@orcsoftware.com> wrote:
>
> could you post an exact configuration please?
>
> on 16/03/2006 10:10 Venkatesh Palani wrote:
> > Hi All,
> > I have some issues getting around configuring multilink over PPPoFR. Is
> > traffic shaping configuration a required one when we configure Multilink
> > PPPoFR ?
> > because I get the following message
> >
> > Apr 9 12:51:45.315: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> on
> > Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must
> be
> > enabled
> > *Apr 9 12:51:45.851: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> on
> > Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must
> be
> > enabled
> >
> > I have 2 multilink interafces 1 and 2
> > and two virtual-templates 1 and 2
> > as you woudl have guessed 1 matches to 1 and 2 matches to 2
> >
> > The cisco documnet shows an example that has a QOS as part of the
> > configuration. coudl any oen shed more light on to this please ?
> >
> > Thank you,
> > venkatesh
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3