From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Mar 16 2006 - 06:58:25 GMT-3
could you post an exact configuration please?
on 16/03/2006 10:10 Venkatesh Palani wrote:
> Hi All,
> I have some issues getting around configuring multilink over PPPoFR. Is
> traffic shaping configuration a required one when we configure Multilink
> PPPoFR ?
> because I get the following message
>
> Apr 9 12:51:45.315: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
> Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must be
> enabled
> *Apr 9 12:51:45.851: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
> Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must be
> enabled
>
> I have 2 multilink interafces 1 and 2
> and two virtual-templates 1 and 2
> as you woudl have guessed 1 matches to 1 and 2 matches to 2
>
> The cisco documnet shows an example that has a QOS as part of the
> configuration. coudl any oen shed more light on to this please ?
>
> Thank you,
> venkatesh
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3