Multicast Helper map...Which method is right?

From: Roberto Fernandez (rofernandez@us.telefonica.com)
Date: Wed Mar 08 2006 - 01:10:47 GMT-3

• Next message: marius@aict.co.za: "Re: RE: CCIE Wannabe in South Africa"
• Previous message: imam@intikom.co.id: "calculate Bandwidth"
• Next in thread: Ramiro Garza: "Re: Multicast Helper map...Which method is right?"
• Maybe reply: Ramiro Garza: "Re: Multicast Helper map...Which method is right?"
• Maybe reply: Ivan: "Re: Multicast Helper map...Which method is right?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Friends,

There is an apparent contradiction between the solutions at IEWB and the
Command Reference Guides.

At IEWB solutions the "ip helper map" is configured at the "incoming
interface" on the "egress router". On the other hand, Command Reference
puts it on the "egress interface"

Are both the same?

Best Regards,
Roberto

• Next message: marius@aict.co.za: "Re: RE: CCIE Wannabe in South Africa"
• Previous message: imam@intikom.co.id: "calculate Bandwidth"
• Next in thread: Ramiro Garza: "Re: Multicast Helper map...Which method is right?"
• Maybe reply: Ramiro Garza: "Re: Multicast Helper map...Which method is right?"
• Maybe reply: Ivan: "Re: Multicast Helper map...Which method is right?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3