From: Ed Lui (edwlui@gmail.com)
Date: Thu Feb 09 2006 - 12:44:25 GMT-3
The answer seems to be clear now.
:-)
On 2/8/06, sameer azam <sameer.azam@gmail.com> wrote:
> Hi,
> Thats seems to me correct but how will u set the stratum value on Cat3500
> Sw.
> Try it before answering it.
> and also u need to set the stratum on R4 as well.
>
> Regards
>
>
>
> On 2/9/06, Ed Lui <edwlui@gmail.com> wrote:
> > How about configure stratum 2 on R1 ?
> >
> > On 2/8/06, sameer azam < sameer.azam@gmail.com> wrote:
> > > Hi,
> > > The topology is like follows;
> > >
> > > SW
> > >
> |
> > >
> |
> > >
> R1______---_______R4
> > >
> > > The link between R1 & Sw is Ethernet connection.
> > > The link between R1 & R4 is Frame-Relay Connection.
> > >
> > > The QUESTION IS;
> > >
> > > You need to configure the R4 & SW for STRATUM 3
> > > Both of R4 & SW should get get their time clock from the R1.
> > >
> > > How would you do this?
> > >
> > > Also note that i am not able to set any stratum value on the SW (3550).
> > >
> > > Regards
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3