show run- pri levels between 2-14

From: mani poopal (mani_ccie@yahoo.com)
Date: Thu Feb 09 2006 - 10:31:56 GMT-3

Next message: mani poopal: "Re: show run- pri levels between 2-14"
Previous message: Larry Roberts: "Re: Problems with privilege mode 5 commands"
Next in thread: mani poopal: "Re: show run- pri levels between 2-14"
Maybe reply: mani poopal: "Re: show run- pri levels between 2-14"
Maybe reply: Ivan: "Re: show run- pri levels between 2-14"
Maybe reply: mani poopal: "Re: show run- pri levels between 2-14"
Maybe reply: mani poopal: "Re: show run- pri levels between 2-14"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

  I have a requirement, so that, I should give specific user access to show run command but without the abilitiy to change the configs.

  I tried following command:
  privilege exec level 14 show run
  username cisco privilege 14 password cisco.

  Now show run on privilege level 14 don't have much information, I would like to see the whole configuration but not give permission to modify the configs. Any help is appreciated.

  Mani

B.ENG,MCSE,CCNP,CCSP,CCIE#14645
(416)431 9929
MANI_CCIE@YAHOO.COM

---------------------------------
Brings words and photos together (easily) with
PhotoMail - it's free and works with Yahoo! Mail.

Next message: mani poopal: "Re: show run- pri levels between 2-14"
Previous message: Larry Roberts: "Re: Problems with privilege mode 5 commands"
Next in thread: mani poopal: "Re: show run- pri levels between 2-14"
Maybe reply: mani poopal: "Re: show run- pri levels between 2-14"
Maybe reply: Ivan: "Re: show run- pri levels between 2-14"
Maybe reply: mani poopal: "Re: show run- pri levels between 2-14"
Maybe reply: mani poopal: "Re: show run- pri levels between 2-14"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3