From: mani poopal (mani_ccie@yahoo.com)
Date: Thu Feb 09 2006 - 10:46:24 GMT-3
Guys I found it thanks
privilege exec level 2 show config
mani poopal <mani_ccie@yahoo.com> wrote:
Hi Guys,
I have a requirement, so that, I should give specific user access to show run command but without the abilitiy to change the configs.
I tried following command:
privilege exec level 14 show run
username cisco privilege 14 password cisco.
Now show run on privilege level 14 don't have much information, I would like to see the whole configuration but not give permission to modify the configs. Any help is appreciated.
Mani
B.ENG,MCSE,CCNP,CCSP,CCIE#14645
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Brings words and photos together (easily) with
PhotoMail - it's free and works with Yahoo! Mail.
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3