From: mani poopal (mani_ccie@yahoo.com)
Date: Thu Feb 09 2006 - 12:29:37 GMT-3
Guys,
I want to do the same thing for PIX, to see the config but not modify, any help is appreciated.
Mani
mani poopal <mani_ccie@yahoo.com> wrote:
It is true, but it make my requirments works, give customer access to config files but not allow to change them.
Mani
Ivan wrote:
show config equal show startup-config (config in non-volatile memory)
show run not equal show config
> Guys I found it thanks
>
> privilege exec level 2 show config
>
> mani poopal wrote:
> Hi Guys,
>
> I have a requirement, so that, I should give specific user access to show
> run command but without the abilitiy to change the configs.
>
> I tried following command:
> privilege exec level 14 show run
> username cisco privilege 14 password cisco.
>
> Now show run on privilege level 14 don't have much information, I would
> like to see the whole configuration but not give permission to modify the
> configs. Any help is appreciated.
>
> Mani
>
>
> B.ENG,MCSE,CCNP,CCSP,CCIE#14645
> (416)431 9929
> MANI_CCIE@YAHOO.COM
>
> ---------------------------------
> Brings words and photos together (easily) with
> PhotoMail - it's free and works with Yahoo! Mail.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> B.ENG,MCSE,CCNP,CCSP,CCIE#14645
> (416)431 9929
> MANI_CCIE@YAHOO.COM
>
> ---------------------------------
> Bring words and photos together (easily) with
> PhotoMail - it's free and works with your Yahoo! Mail.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3