From: RIDNEY_M_LAUDIANO.TTSP@ts.tsuneishi.co.jp
Date: Wed Feb 08 2006 - 21:27:07 GMT-3
Hi, I have some comments.
The "frame-relay interface-dlci" statement do dynamic L2 to L3 mappings and uses
inverse-arp.
The "frame-relay map" statement statically maps L2 to L3 and disables
inverse-arp automatically.
Ridney
Saad Adam <subjectvsobject@yahoo.com> wrote on 02/08/2006 10:28:54 PM:
) Hi there,
) Just a few more comments.
) no frame relay inverse-arp and no arp frame-relay give you
) the same result of not getting dynamic frame relay mapping from
) the FR switch, so you can specify static mapping manually using
) the " frame relay map <ip address> <dlci>" or the frame relay
) interface-dlci <dlci commands.
) So if a question says do not use dynamic mapping, or use
) static mapping, or use the specified mappings, that means you
) need to disable the frame relay up using either of the two
) commands above. The best is to use the no frame relay inverse-
) arp command.
) Hope that clarifies it more.
) Best regards,
) Saad.
) PANDI MOORTHY <moorthypandi@gmail.com> wrote:
) great, got it. Thanks
) Regards.
) Pandi
)
) On 2/8/06, Anderson Mota Alves wrote:
) >
) > Hi Pandi,
) >
) > Yes you have to use "no frame-relay inverse-arp" in both
) cases because it
) > says "Do not use frame relay inverse ARP to build the FR network" the
) > statement is telling you TO NOT USE so if you leave the
) frame-relay without
) > puting the command "no frame-relay inverse-arp" you would be using
) > frame-relay inverse-arp so the "do not use" tells you to use
) the command,
) > you see the ccie lab apart from your knoweldge you have to be
) careful with
) > the wording of the requirements, they seems to be tricky most
) of the time.
) >
) > So both of the cases use "no frame-relay inverse-arp" and other things
) > such as redistribution when you read something telling you do a
) > redistribution between OSPF and RIP (the between means mutual
) > redistribution) from OSPF to RIP and RIP to OSPF.
) >
) > I hope it helps,
) >
) > Andy
) >
) >
) >
) >
) > ------------------------------
) > From: *PANDI MOORTHY *
) > Reply-To: *PANDI MOORTHY *
) > To: *Cisco certification *
) > Subject: *confused with using the command "no frame-relay inverse-arp*
) > Date: *Wed, 8 Feb 2006 17:25:03 +0800*
) > >Hi group
) > >
) > >
) > >
) > >Frame-relay question in IE lab work,
) > >
) > >
) > >
) > >For some scenario the requirement is "Do not use any dynamic
) frame relay
) > >mapping" to build the FR network
) > >
) > >
) > >
) > >And for other scenario the requirement is "Do not use frame
) relay inverse
) > >ARP to build the FR network
) > >
) > >
) > >
) > >
) > >
) > > I am confused with using the command "no frame-relay inverse-arp",
) > should I
) > >need to configure this command both question?
) > >
) > >
) > >
) > >
) > >Need your help. Thanks in advance
) > >
) > >Regards.
) > >Pandi Moorthy
) > >
) >
) >_______________________________________________________________________
) > >Subscription information may be found at:
) > >http://www.groupstudy.com/list/CCIELab.html
) _______________________________________________________________________
) Subscription information may be found at:
) http://www.groupstudy.com/list/CCIELab.html
)
) ---------------------------------
) Get the latest photos from your camera to your friends & family
) fast and easy with PhotoMail from Yahoo! Mail.
) _______________________________________________________________________
) Subscription information may be found at:
) http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3