From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jan 23 2006 - 03:53:52 GMT-3
Can you send the output of the "show ip route 150.1.0.0 255.255.0.0
longer-prefixes" from R3?
Thanks!
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Greg Gombas
Sent: Sunday, January 22, 2006 2:51 PM
To: ccielab@groupstudy.com
Subject: IE LAB 7 Task 4.6 OSPF
Hello Brians,
Task 4.6 of Volume 1, Lab 7 requires you to use the area range command
to
summarize the 150.1.4.0 routes but later in the excercise you then show
a
virtual link being established to R1 causing it to receive the /32
subnets
from Area0 and forward them R3.
I was just wondering how that would be addressed? I used a distribute
list
on R3 but I was wondering why this wasn't addressed in the solution
guide?
If its just an oversight thats cool but it had me scratching my head for
some time.
I guess a related question would be can you filter intra-area routes
between
routers in the same area?
Thanks,
Greg
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3