2950 has one Ethernet port !!

From: George He (georgeh@adstream.com)
Date: Mon Jan 23 2006 - 01:50:34 GMT-3

Next message: Brian Dennis: "RE: IE LAB 7 Task 4.6 OSPF"
Previous message: Victor Cappuccio: "RE: Inserting Calssless network into BGP table without netmask"
Next in thread: Guyler, Rik: "RE: 2950 has one Ethernet port !!"
Maybe reply: Guyler, Rik: "RE: 2950 has one Ethernet port !!"
Maybe reply: Church, Chuck: "RE: 2950 has one Ethernet port !!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

We have a 2950 switch, all ports should be FastEthernet. But F0/17 is
just a Ethernet port, not FastEthernet port. Anyone saw this before?

AUMEL-SW1#show ip int brief
Interface IP-Address OK? Method Status
Prot
ocol
Vlan1 192.168.37.251 YES NVRAM up
up

FastEthernet0/1 unassigned YES unset up
up

FastEthernet0/2 unassigned YES unset up
up

FastEthernet0/3 unassigned YES unset up
up

FastEthernet0/4 unassigned YES unset up
up

FastEthernet0/5 unassigned YES unset up
up

FastEthernet0/6 unassigned YES unset up
up

FastEthernet0/7 unassigned YES unset up
up

FastEthernet0/8 unassigned YES unset up
up

FastEthernet0/9 unassigned YES unset up
up

FastEthernet0/10 unassigned YES unset up
up

FastEthernet0/11 unassigned YES unset down
down

FastEthernet0/12 unassigned YES unset up
up

FastEthernet0/13 unassigned YES unset up
up

FastEthernet0/14 unassigned YES unset up
up

FastEthernet0/15 unassigned YES unset up
up

FastEthernet0/16 unassigned YES unset up
up

Ethernet0/17 unassigned YES unset down
down
FastEthernet0/18 unassigned YES unset down
down

FastEthernet0/19 unassigned YES unset up
up

FastEthernet0/20 unassigned YES unset up
up

FastEthernet0/21 unassigned YES unset up
up

FastEthernet0/22 unassigned YES unset up
up

FastEthernet0/23 unassigned YES unset up
up

FastEthernet0/24 unassigned YES unset up
up

AUMEL-SW1#

AUMEL-SW1#show ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(12c)EA1, RELEASE
SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 24-Nov-02 23:31 by antonino
Image text-base: 0x80010000, data-base: 0x80562000

ROM: Bootstrap program is CALHOUN boot loader

AUMEL-SW1 uptime is 51 weeks, 2 days, 3 hours, 14 minutes
System returned to ROM by power-on
System restarted at 01:26:57 UTC Sat Jan 29 2005
System image file is "flash:/c2950-i6q4l2-mz.121-12c.EA1.bin"

cisco WS-C2950-24 (RC32300) processor (revision H0) with 21002K bytes of
memory.
Processor board ID FOC0708W03T
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0C:30:80:7D:00
Motherboard assembly number: 73-5781-11
Power supply part number: 34-0965-01
Motherboard serial number: FOC0708018C
Power supply serial number: DAB07061F8K
Model revision number: H0
Motherboard revision number: A0
Model number: WS-C2950-24
System serial number: FOC0708W03T
Configuration register is 0xF

Next message: Brian Dennis: "RE: IE LAB 7 Task 4.6 OSPF"
Previous message: Victor Cappuccio: "RE: Inserting Calssless network into BGP table without netmask"
Next in thread: Guyler, Rik: "RE: 2950 has one Ethernet port !!"
Maybe reply: Guyler, Rik: "RE: 2950 has one Ethernet port !!"
Maybe reply: Church, Chuck: "RE: 2950 has one Ethernet port !!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3